I have a few items to address on Jasmine:
-> Jib Sheets were rigged in the original 1992 style with the original 1992 Harken Ratchet Blocks. These are "bullet-proof" and still work, but I'd like to consider a more modern auto-tacking jib from the cross bar. That said, the Hobie 20 Jib is cut "full" so that I don't think I can use the stock Jib in that manner, because the clew comes back too far.
At the moment, I'm trying out some hand-me-down Garhauer blocks on the jib (with no ratcheting feature), and I need Stainless springs to keep the blocks "perky" and pointed towards me when I single hand. That way I can cleat off after I've hauled the Jib in after each tack.
-> Spinnaker Halyard and Sheets. I want to run spring ratchet blocks from the front cross bar to allow the Spinnaker to be trimmed in, and I need a better Halyard Douse System. (1 & 2) Link Below
Below are some links for each topic as I research exactly what I want to do. There are also some instructive videos about what others are doing:
Spinnaker Layout on Beachcats.
(1) http://www.harken.com/content.aspx?id=3913
(2) SNU Site: http://gobarefootstudio.com/PDFs/SNU_H20Spin_1.pdf
(3) https://www.youtube.com/watch?v=Pmckx-DuQt0
(4) https://www.youtube.com/watch?v=pqxpx4gkiro
